While we work with coatings customers around the world to come up with custom solutions to their unique coating challenges, quite often one of our standard grades of fluoropolymers are just the solution they need. We've used our experience to formulate these multi-layer composite coatings that are ideal for a range of applications.
Each coating begins by specially preparing the substrate of the application which ensures optimum cleanliness and adhesion of the coating system. This is essential as it helps increase the lifespan of the coating as the final result will be free from flaws.
We then apply layers of coatings which vary depending on how the end application will be used. Check out the different multi-layer composite coatings we can offer and get in touch with our team to discuss your project.
AFC 3000 AFC 3000CR
Coatings Key
-
An EU/FDA approved superior performance non-stick coating layer based on a unique FEP/PTFE Fluoropolymer
-
An EU/FDA approved superior performance non-stick coating layer based on a unique FEP/PTFE Fluoropolymer
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for hoppers and chutes.
KEY FEATURES
- Recommended Dry Film Thickness: 40 +/- 5 microns
- Operating Temperature Range: -40°c to +205°c
- Maximum Intermittent Temperature: +230°c
AFC 3000 AFC 3000CR
Coatings Key
-
An EU/FDA approved superior performance non-stick coating layer based on a unique FEP/PTFE Fluoropolymer
-
An EU/FDA approved superior performance non-stick coating layer based on a unique FEP/PTFE Fluoropolymer
-
Ceramic reinforced base layer with enhanced abrasion and corrosion resistance in combination with an optimal bonding to the metal substrate
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for hoppers and chutes.
KEY FEATURES
- Recommended Dry Film Thickness: 40 +/- 5 microns
- Operating Temperature Range: 205°c
- Maximum Intermittent Temperature: +230°c
AFC 3100 AFC 3100CR
Coatings Key
-
An EU/FDA approved high performance non-stick coating layer based on a unique PES/PTFE Fluoropolymer
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for pizza pans, pie hoops, tart tins and spreader bars.
KEY FEATURES
- Recommended Dry Film Thickness: 25 +/- 5 microns
- Operating Temperature Range: -40°c to 230°c
- Maximum Intermittent Temperature: +250°c
AFC 3100 AFC 3100CR
Coatings Key
-
An EU/FDA approved high performance non-stick coating layer based on a unique PES/PTFE Fluoropolymer
-
Ceramic reinforced base layer with enhanced abrasion and corrosion resistance in combination with an optimal bonding to the metal substrate
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for pizza pans, pie hoops, tart tins and spreader bars.
KEY FEATURES
- Recommended Dry Film Thickness: 25 +/- 5 microns
- Operating Temperature Range: -40°c to 230°c
- Maximum Intermittent Temperature: +250°c
AFC 3200 AFC 3200CR
Coatings Key
-
A premium EU/FDA non-stick coating PTFE layer offering excellent non-stick and longer life performance
-
Reinforced base layer with improved abrasion and permeation resistance in combination with an optimal bonding to the metal substrate
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for crumpet rings, pie hoops, omelette tins, baguette trays and waffle plates.
KEY FEATURES
- Recommended Dry Film Thickness: 30-40 microns
- Operating Temperature Range: -40°c to 260°c
- Maximum Intermittent Temperature: 315°c
AFC 3200 AFC 3200CR
Coatings Key
-
A premium EU/FDA non-stick coating PTFE layer offering excellent non-stick and longer life performance
-
A more highly reinforced ceramic primer/base layer with improved abrasion and permeation resistance in combination with an optimal bonding to the metal substrate
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for crumpet rings, pie hoops, omelette tins, baguette trays and waffle plates.
KEY FEATURES
- Recommended Dry Film Thickness: 30-40 microns
- Operating Temperature Range: -40°c to 260°c
- Maximum Intermittent Temperature: 315°c
AFC 3300 AFC 3300CR
Coatings Key
-
A tough fluoropolymer layer offering excellent non-stick properties combined with good mechanical strength and permeation resistance.
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for burger bun trays, roll trays and cake moulds.
KEY FEATURES
- Recommended Dry Film Thickness: 50-80 microns
- Operating Temperature Range: -200°c to +260°c
- Maximum Intermittent Temperature: 260°c
AFC 3300 AFC 3300CR
Coatings Key
-
A tough fluoropolymer layer offering excellent non-stick properties combined with good mechanical strength and permeation resistance.
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
Ceramic reinforced base layer with enhanced abrasion and corrosion resistance in combination with an optimal bonding to the metal substrate
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for burger bun trays, roll trays and cake moulds.
KEY FEATURES
- Recommended Dry Film Thickness: 50-80 microns
- Operating Temperature Range: -200°c to +260°c
- Maximum Intermittent Temperature: 260°c
AFC 3400 AFC 3400CR
Coatings Key
-
A special fluoropolymer layer giving excellent non-stick properties especially for high sugar content food / bakeware applications
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for burger bun trays, roll trays and cake moulds.
KEY FEATURES
- Recommended Dry Film Thickness: 30-60 microns
- Operating Temperature Range: -200°c to +205°c
- Maximum Intermittent Temperature: +215°c
AFC 3400 AFC 3400CR
Coatings Key
-
A special fluoropolymer layer giving excellent non-stick properties especially for high sugar content food / bakeware applications
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
Ceramic reinforced base layer with enhanced abrasion and corrosion resistance in combination with an optimal bonding to the metal substrate
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for burger bun trays, roll trays and cake moulds.
KEY FEATURES
- Recommended Dry Film Thickness: 30-60 microns
- Operating Temperature Range: -200°c to +205°c
- Maximum Intermittent Temperature: +215°c
AFC 3300+ AFC 3400+
Coatings Key
-
Added fluoropolymer top coat layer.
-
A tough fluoropolymer layer offering excellent non-stick properties combined with good mechanical strength and permeation resistance.
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for bread tins, cake tins, mini loaf tins or trays and muffin trays.
Similar to standard AFC 3300 but with an added fluoropolymer topcoat layer giving improved non-stick life and added steam permeation resistance.
KEY FEATURES
- Recommended Dry Film Thickness: 40-70 microns
- Operating Temperature Range: -200°c to +260°c
- Maximum Intermittent Temperature: 260°c
AFC 3300+ AFC 3400+
Coatings Key
-
Added fluoropolymer topcoat layer
-
A special fluoropolymer layer giving excellent non-stick properties especially for high sugar content food / bakeware applications
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for bread tins, cake tins, mini loaf tins or trays and muffin trays.
Similar to standard AFC 3400 but with an added fluoropolymer topcoat layer giving improved non-stick life and added steam permeation resistance.
KEY FEATURES
- Recommended Dry Film Thickness: 30-60 microns
- Operating Temperature Range: -200°c to +205°c
- Maximum Intermittent Temperature: +215°c
AFC 3500 AFC 3500CR
Coatings Key
-
A specially formulated non-stick fluoropolymer layer to enhance to the coating life and give optimum mechanical properties, plus a very smooth finish
-
A high-build fluoropolymer mid coat layer offering superior release and longer life
-
A fluoropolymer layer offering excellent non-stick properties combined with good mechanical strength and permeation resistance
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for bread straps and bread tins.
KEY FEATURES
- Recommended Dry Film Thickness: 60-90 microns
- Operating Temperature Range: -200°c to +260°c
- Maximum Intermittent Temperature: 260°c
AFC 3500 AFC 3500CR
Coatings Key
-
A specially formulated non-stick fluoropolymer layer to enhance to the coating life and give optimum mechanical properties, plus a very smooth finish
-
A high-build fluoropolymer mid coat layer offering superior release and longer life
-
A fluoropolymer layer offering excellent non-stick properties combined with good mechanical strength and permeation resistance
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
Ceramic reinforced base layer with enhanced abrasion and corrosion resistance in combination with an optimal bonding to the metal substrate
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for bread straps and bread tins.
KEY FEATURES
- Recommended Dry Film Thickness: 60-90 microns
- Operating Temperature Range: -200°c to +260°c
- Maximum Intermittent Temperature: 260°c
AFC 3600
Coatings Key
-
A pure fluoropolymer layer offering high release properties and surface smoothness
-
A tough fluoropolymer non-stick layer offering good mechanical strength and permeation resistance
-
A tough fluoropolymer non-stick layer offering good mechanical strength and permeation resistance
-
An excellent solvent-borne primer for high end food/bakeware applications offering outstanding adhesion properties
-
A special stainless steel reinforcement layer for enhanced scratch and abrasion resistance
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for dough hoppers and chutes.
KEY FEATURES
- Recommended Dry Film Thickness: 60-90 microns
- Operating Temperature Range: -240°c to +260°c
- Maximum Intermittent Temperature: 260°c
AFC 3700 (3 Coat PTFE/PFA)
Coatings Key
-
A premium EU/FDA non-stick coating PTFE layer that sets a new standard for excellent non-stick and longer life performance
-
A partially reinforced mid coat PTFE layer
-
A heavily reinforced primer layer offering a good resistance to abrasion and wear
-
Specially prepared substrate for optimum cleanliness and adhesion of the stainless steel hard base
Ideal for crumpet rings, pie hoops, domestic cookware and waffle plates.
KEY FEATURES
- Recommended Dry Film Thickness: 35-45 microns
- Operating Temperature Range: -195°c to +260°c
- Maximum Intermittent Temperature: 315°c
Multi-layer Composite Coatings
Whether you need one of our "AFC" grades of coatings or would like us to design a custom coating for you, get in touch and we can take it from there.
